Blog · Outreach

Email Deliverability for Recruiting Agencies: Why Your Outreach Lands in Spam and How to Fix It

Most agencies that tell me outreach "stopped working" usually have the same problem. Their emails stopped reaching the inbox. Here are the five things that decide inbox or spam for a recruiting desk, how to spot each one going wrong, and what to do about it.

JD Julian D'Angelo Nov 3, 2026 7 min read

Your best message is worthless in the spam folder

It happens quietly. Your sending tool says delivered. Your ATS logs the touch. Nobody replies, and you blame the market, the role, or the subject line.

If you haven't set up separate sending inboxes yet, start with our multi-inbox setup guide, then come back here.

What delivered really means

"Delivered" only means the receiving server accepted your email. Then Gmail or Outlook decides if it goes to the inbox, the Promotions tab or spam. Deliverability is that second decision, and your sending tool can't see it.

So you have to look for the signs. You probably have a problem if:

  • Reply rates dropped and you didn't change the copy, the audience, or the role.
  • Replies come from Gmail users but almost never from Outlook users, or the other way round.
  • More than 3% of your emails bounce.
  • A test email to your own personal Gmail or Outlook lands in spam.
  • Candidates tell you they "just found" your email weeks later.

One of these is a warning. Two or more means stop adding volume and fix the basics below first.

1. Send from aged, separate domains, three inboxes each

Never run cold outreach from your agency's main domain. If it gets flagged, your invoices, offer letters and client emails go to spam too. Buy a few lookalike domains for outreach instead, like getyouragency.com or youragencyhq.com.

Domain age matters more than most agencies think. A domain registered last week that starts sending hundreds of emails looks exactly like a spammer, because that's what spammers do. Buy your sending domains weeks before you plan to launch a campaign.

Put three inboxes on each domain. That spreads the load without making any one domain look like a mass mailer. Two recruiters sending from six inboxes need two domains.

Set up SPF, DKIM and DMARC on every domain. These are DNS records that prove you're allowed to send as that domain. Gmail has required them for anyone sending 5,000 or more emails a day since February 2024, and Microsoft started enforcing the same rules for Outlook in May 2025. You may be under that volume, but providers trust authenticated mail more at any volume. Start DMARC at p=none, then tighten it once the domain is warm.

2. Warm up with real sending, then cap each inbox at 20 a day

Warmup is not optional. A brand new inbox has no history, so providers don't trust it yet. Warmup builds that history before your first campaign. Give every new inbox at least two weeks of warmup before it sends a single cold email, and keep warmup running after campaigns start.

Use a warmup service that mimics real sending. Skip automated warming pools. Pools are networks of thousands of inboxes that email each other on a schedule. The traffic is patterned, the replies are canned, and Gmail and Outlook have learned to spot it. You also share a reputation with every other sender in the pool, including the bad ones. A good service looks like a real person's mailbox, with varied timing, real back and forth, and messages that get opened, replied to and pulled out of spam.

The sweet spot is 20 emails per inbox per day. Higher limits used to work. Providers are stricter now, and 20 a day keeps each inbox looking like one busy recruiter. When you need more volume, add inboxes and domains. Don't raise the cap.

Here's what that looks like with three inboxes per domain and a three email sequence:

  • 60 emails a day: 3 inboxes on 1 domain, about 20 new contacts a day.
  • 120 emails a day: 6 inboxes on 2 domains, about 40 new contacts a day.
  • 180 emails a day: 9 inboxes on 3 domains, about 60 new contacts a day.
  • 300 emails a day: 15 inboxes on 5 domains, about 100 new contacts a day.

3. Keep bounces under 3%

Every bounce tells Gmail and Outlook you're emailing people you don't know. Keep bounces under 3% of sends. Past that, your domain's reputation drops fast.

Recruiting data goes stale quickly. Candidates change jobs, and the email in your ATS from two years ago is often dead. Three rules:

  • Verify every address before it goes into a sequence, including ones from your own ATS.
  • Remove hard bounces the same day. Never send to that address again.
  • Be careful with old lists. Re-verify anything older than a few months before you use it.

4. Send like a person

A recruiter doesn't send 20 emails in the same ten seconds. Many tools do exactly that, and providers notice.

  • Space sends a few minutes apart.
  • Spread them across the working day in the recipient's time zone.
  • Don't send everything at 9:00 sharp on Monday.
  • Keep daily volume steady. A quiet week followed by a 300 email day looks like a compromised account.

5. Write emails people don't report as spam

The strongest signal of all is how people react. Replies help. Spam reports hurt more than anything else on this list. Google asks senders to keep spam complaints below 0.3% and recommends staying under 0.1%. That's one report per 1,000 emails.

  • Be relevant. A candidate who gets a role that fits their background replies. One who gets a generic blast reports it. Personalization helps deliverability as much as reply rates.
  • Keep it plain. Plain text, no images, no attachments, and no links in the first email if you can avoid it.
  • Turn off open tracking. The tracking pixel is a small hidden image that filters treat with suspicion, and the open rate it reports is unreliable anyway. More on that in Stop Tracking Open Rate.
  • Make opting out easy, and honor it at once. Someone who can't find a way out hits the spam button instead.

A 10 minute weekly check

Put this on the calendar every Monday:

  1. Bounce rate under 3% on every inbox.
  2. Spam complaints under 0.1% in Google Postmaster Tools.
  3. No inbox above 20 sends a day.
  4. Warmup still running on every inbox.
  5. A test email from each domain to a personal Gmail and a personal Outlook lands in the inbox.
  6. Reply rate by inbox. One inbox far below the others is usually the first one in trouble. Pause it and let warmup run.

How Talin handles this for you

We built Talin's sending around the same rules:

  • Verified data only. Talin checks every email across 5+ data providers and only spends credits on verified hits. That gives 97% email accuracy and bounces under 3%.
  • Per inbox limits. Connect up to 10 inboxes per user and set each one's daily limit, so 20 a day is one setting.
  • Human pacing. Sends go out a few minutes apart across the day.
  • Relevant copy. The AI Copywriter writes each email from the role and the candidate's actual background, which is what keeps spam reports down.
  • Stops on reply. A sequence stops the moment someone replies, and opt-outs are honored at once.

Deliverability is boring work, and it decides whether any of your outreach counts. Get the five basics right before you spend another hour on subject lines.

Let us host your inboxes